- Calipers, Gauges, Keratometers
- Cannulas and Chamber Maintainers
- Capsulorhexis Forceps
- Choppers, Dividers and Rotators
- Clamps
- Diamond Knives
- Dilators / Lacrimal Probes
- Forceps
- Fixation Rings
- Hooks, Manipulators and Rotators
- Injectors and Inserters
- Irrigation and Aspiration
- Markers
- Needle Holders
- Punches
- Scissors
- Shields and Laser Protection
- Spatulas
- Specula
- Sterilising Trays
- Vitreoretinal
Kelman-McPherson Tying Forceps
● 6mm tying platforms
● 45° angled shafts, tip to angle length 12mm
● Flat handle, length 90mm
● Design registration number 004383396-0001
Innovation is at the heart of our philosophy and is driven by our enduring commitment to provide surgeons with only the highest quality reusable titanium ophthalmic instrumentation. We are proud to announce and unveil our latest line of instrumentation, the “E-Range”. This range represents the application of cutting edge technology fused with over 60 years of engineering knowledge. These instruments offer surgeons an elegant, well balanced and ergonomically designed handle while still providing our high quality, consistent and durable functionality.
Related Products
2-100E
Pierse Notched Forceps
● Pierse 0.25mm notched, 6mm tying platforms
● Straight shafts
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-716GER8-2
Inamura Round Handle Capsulorhexis Forceps
Incision down to 1.8mm
● Sharp pointed serrated tips
● Cross action tips, 1.5mm width at pivot box
● Curved shaft, tip to pivot point 8.5mm
● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
● Tips angled 45° from shaft
● Round handle, overall length 110mm
● Design registration number 004383396-0001
2-716GER8-3
Inamura Round Handle Capsulorhexis Forceps
Incision down to 1.8mm
● Sharp pointed serrated tips
● Cross action tips, 1.5mm width at pivot box
● Straight shaft, tip to pivot point 9.5mm
● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
● Tips angled 45° from shaft
● Round handle, overall length 110mm
● Design registration number 004383396-0001
2-716GE-1S
Inamura Flat Handle Capsulorhexis Forceps
Incision down to 1.8mm
● Sharp pointed serrated tips
● Cross action tips, 1.5mm width at pivot box
● Curved shaft, tip to pivot point 10.5mm
● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
● Tips angled 45° from shaft
● Flat handle, overall length 86mm
● Design registration number 004383396-0001
DK7710E
DK IOL Holding Forceps
• 45° angled shafts, tip to angle length 7mm
• Highly polished inner jaw surfaces
• Flat handle, length 111mm
• Design registration number 004383396-0001
2-110-3E
Straight Toothed Forceps (0.12mm)
● 0.12mm, 1 x 2 flat teeth, 6mm tying platforms
● Straight shafts
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-110-1E
Bonn Suturing Forceps (0.10mm)
● 0.10mm, 1 x 2 teeth, 6mm tying platforms
● Straight shafts
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-500E
McPherson Tying Forceps
● 6mm tying platforms
● Straight shafts
● Flat handle, length 90mm
● Design registration number 004383396-0001