- Calipers, Gauges, Keratometers
- Cannulas and Chamber Maintainers
- Capsulorhexis Forceps
- Choppers, Dividers and Rotators
- Clamps
- Diamond Knives
- Dilators / Lacrimal Probes
- Forceps
- Fixation Rings
- Hooks, Manipulators and Rotators
- Injectors and Inserters
- Irrigation and Aspiration
- Markers
- Needle Holders
- Punches
- Scissors
- Shields and Laser Protection
- Spatulas
- Specula
- Sterilising Trays
- Vitreoretinal
Quick Links
Browse
Call us
Contact
Browse our products
Call us +44(0)1462 893254
Other ways to get in touch
New Arrivals
Take a look at our latest products to be introduced to our extensive range.
New Arrivals
2-706G-1RE
Mackool-Inamura Round Handle Capsulorhexis Forceps, Sharp Tip
Incision down to 1.8mm
● Pointed serrated interlocking tips
● Curved shaft
● Tip to pivot point 11mm
● Cross action tips, 1.5mm width at pivot box
● Tips angled 45° to handle
● 8mm diameter round handle, overall length 116mm
● Design registration number 004383396-0001
2-706GRE
Mackool-Inamura Round Handle Capsulorhexis Forceps, Blunt Tips
Incision down to 1.8mm
● Blunt serrated interlocking tips
● Curved shaft
● Tip to pivot point 11mm
● Cross action tips, 1.5mm width at pivot box
● Tips angled 45° to handle
● 8mm diameter round handle, overall length 116mm
● Design registration number 004383396-0001
2-716G-10RE
Jones – Inamura Round Handle Capsulorhexis Forceps
Incision down to 1.8mm
● Pointed serrated interlocking tips
● Curved shaft, tip to pivot point 11mm
● Marks on shaft every 1mm from tip to 6mm
● Cross action tips, 1.5mm width at pivot box
● Tips angled 45° to handle
● 8mm diameter round handle, overall length 115mm
● Design registration number 004383396-0001
2-200E
Pierse Notched Colibri Forceps
● Pierse 0.25mm notched, tip length 1.5mm
● 6mm tying platforms
● Colibri style shafts
● Micro flat handle, length 77mm
● Design registration number 004383396-0001
2-215E
Troutman-Barraquer Colibri Forceps
● 0.12mm, 1 x 2 teeth, tip length 0.8mm
● 6mm tying platforms
● Colibri style shafts
● Micro flat handle, length 77mm
● Design registration number 004383396-0001
9-544-4
Doi-Uematsu Intravitreal Injection Guide
● 0.4mm needle guide hole, suitable for 30 gauge needle or smaller
● 12mm diameter ring with 'snow-tyre pattern' fixation
● 8.4mm break in ring
● Suitable for right handed surgeon
● Held in the non-dominant hand (left)
● Round handle, length 98mm
2-520E
Kelman-McPherson Tying Forceps
● 4mm tying platforms
● 45° angled shafts, tip to angle length 5mm
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-529-1ER8
Angled Tying Round Handle Forceps
● 9.5mm tying platforms
● 45° angled shafts, tip to angle length 10.5mm
● Long round handle, length 112mm
● Design registration number 004383396-0001
2-817-1E
Salvitti Akahoshi Micro Prechopper (Large)
• Tips fully open to 2.5mm
• Flattened tips in vertical plane, tip height 1.5mm
• 1.8mm maximum width at incision point
• Straight shafts, reverse cross action style
• Round handle, length 119mm
• Design registration number 004383396-0001
2-787-1E
DMEK Forceps
• Angled tip
• Serrated interlocking tips
• Tip to pivot point 9.8mm
• 1.5mm width at pivot box
• Tips angled 45° to handle
• Flat handle, length 113mm
• Design registration number 004383396-0001
2-716GN-3E
Inamura Flat Handle Capsulorhexis Forceps – Serrated Cross Action Tip
Incision down to 1.5mm
• Sharp pointed serrated tips
• Cross action tips, 1.2mm width at pivot box
• Curved shaft, tip to pivot point 9.5mm
• Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Tips angled 45° from shaft
• Flat handle, overall length 110mm
• Design registration number 004383396-0001
2-716G-9RSE
Calladine-Inamura Short Round Handle Capsulorhexis Forceps – Corneal Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 10mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short round handle, overall length 90mm
• Design registration number 004383396-0001
2-716G-9SE
Calladine-Inamura Short Flat Handle Capsulorhexis Forceps – Corneal Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 10mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short flat handle, overall length 90mm
• Design registration number 004383396-0001
2-716G-8RSE
Calladine-Inamura Short Round Handle Capsulorhexis Forceps – Scleral Tunnel Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 11mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short round handle, overall length 90mm
• Design registration number 004383396-0001
2-716G-8SE
Calladine-Inamura Short Flat Handle Capsulorhexis Forceps – Scleral Tunnel Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 11mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short flat handle, overall length 90mm
• Design registration number 004383396-0001
2-500-2E
Straight Tying Forceps
● 6mm tying platforms
● Delicate tip, 0.22mm
● Straight shafts
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-100-1E
Pierse Notched Forceps
• Pierse 0.3mm notched, 6mm tying platforms
• Straight shafts
• Flat handle, length 90mm
2-796E
Nucleus Removal Forceps (serrated tip)
● 4mm serrated tips
● 30° angled shafts, tip to angle length 14mm
● Flat handle, length 88mm
● Design registration number 004383396-0001
2-900E
Plain Tip Forceps
● Plain tips without tying platforms
● Straight shaft
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-529E
Kelman-McPherson Tying Forceps
● 6mm tying platforms
● 45° angled shafts, tip to angle length 10mm
● Flat handle, length 113mm
● Design registration number 004383396-0001
Browse our latest reusable titanium instruments
Product Ranges
Browse our innovative product ranges
E-Range / Core Values / Essential Cataract
Instrument Groups
Browse our products via instrument groups
Procedures
Browse by surgical procedure
New Arrivals
Take a look at our latest products to be introduced to our extensive range.
New Arrivals
2-706G-1RE
Mackool-Inamura Round Handle Capsulorhexis Forceps, Sharp Tip
Incision down to 1.8mm
● Pointed serrated interlocking tips
● Curved shaft
● Tip to pivot point 11mm
● Cross action tips, 1.5mm width at pivot box
● Tips angled 45° to handle
● 8mm diameter round handle, overall length 116mm
● Design registration number 004383396-0001
2-706GRE
Mackool-Inamura Round Handle Capsulorhexis Forceps, Blunt Tips
Incision down to 1.8mm
● Blunt serrated interlocking tips
● Curved shaft
● Tip to pivot point 11mm
● Cross action tips, 1.5mm width at pivot box
● Tips angled 45° to handle
● 8mm diameter round handle, overall length 116mm
● Design registration number 004383396-0001
2-716G-10RE
Jones – Inamura Round Handle Capsulorhexis Forceps
Incision down to 1.8mm
● Pointed serrated interlocking tips
● Curved shaft, tip to pivot point 11mm
● Marks on shaft every 1mm from tip to 6mm
● Cross action tips, 1.5mm width at pivot box
● Tips angled 45° to handle
● 8mm diameter round handle, overall length 115mm
● Design registration number 004383396-0001
2-200E
Pierse Notched Colibri Forceps
● Pierse 0.25mm notched, tip length 1.5mm
● 6mm tying platforms
● Colibri style shafts
● Micro flat handle, length 77mm
● Design registration number 004383396-0001
2-215E
Troutman-Barraquer Colibri Forceps
● 0.12mm, 1 x 2 teeth, tip length 0.8mm
● 6mm tying platforms
● Colibri style shafts
● Micro flat handle, length 77mm
● Design registration number 004383396-0001
9-544-4
Doi-Uematsu Intravitreal Injection Guide
● 0.4mm needle guide hole, suitable for 30 gauge needle or smaller
● 12mm diameter ring with 'snow-tyre pattern' fixation
● 8.4mm break in ring
● Suitable for right handed surgeon
● Held in the non-dominant hand (left)
● Round handle, length 98mm
2-520E
Kelman-McPherson Tying Forceps
● 4mm tying platforms
● 45° angled shafts, tip to angle length 5mm
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-529-1ER8
Angled Tying Round Handle Forceps
● 9.5mm tying platforms
● 45° angled shafts, tip to angle length 10.5mm
● Long round handle, length 112mm
● Design registration number 004383396-0001
2-817-1E
Salvitti Akahoshi Micro Prechopper (Large)
• Tips fully open to 2.5mm
• Flattened tips in vertical plane, tip height 1.5mm
• 1.8mm maximum width at incision point
• Straight shafts, reverse cross action style
• Round handle, length 119mm
• Design registration number 004383396-0001
2-787-1E
DMEK Forceps
• Angled tip
• Serrated interlocking tips
• Tip to pivot point 9.8mm
• 1.5mm width at pivot box
• Tips angled 45° to handle
• Flat handle, length 113mm
• Design registration number 004383396-0001
2-716GN-3E
Inamura Flat Handle Capsulorhexis Forceps – Serrated Cross Action Tip
Incision down to 1.5mm
• Sharp pointed serrated tips
• Cross action tips, 1.2mm width at pivot box
• Curved shaft, tip to pivot point 9.5mm
• Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
• Tips angled 45° from shaft
• Flat handle, overall length 110mm
• Design registration number 004383396-0001
2-716G-9RSE
Calladine-Inamura Short Round Handle Capsulorhexis Forceps – Corneal Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 10mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short round handle, overall length 90mm
• Design registration number 004383396-0001
2-716G-9SE
Calladine-Inamura Short Flat Handle Capsulorhexis Forceps – Corneal Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 10mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short flat handle, overall length 90mm
• Design registration number 004383396-0001
2-716G-8RSE
Calladine-Inamura Short Round Handle Capsulorhexis Forceps – Scleral Tunnel Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 11mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short round handle, overall length 90mm
• Design registration number 004383396-0001
2-716G-8SE
Calladine-Inamura Short Flat Handle Capsulorhexis Forceps – Scleral Tunnel Incision
Incision down to 1.8mm
• Sharp pointed serrated interlocking tips
• Curved shaft, tip to pivot point 11mm
• Marks on shaft at 2.5mm and 5mm denote desired size of capsulorhexis
• Cross action tips, 1.5mm width at pivot box
• Tips angled 45° to handle
• Short flat handle, overall length 90mm
• Design registration number 004383396-0001
2-500-2E
Straight Tying Forceps
● 6mm tying platforms
● Delicate tip, 0.22mm
● Straight shafts
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-100-1E
Pierse Notched Forceps
• Pierse 0.3mm notched, 6mm tying platforms
• Straight shafts
• Flat handle, length 90mm
2-796E
Nucleus Removal Forceps (serrated tip)
● 4mm serrated tips
● 30° angled shafts, tip to angle length 14mm
● Flat handle, length 88mm
● Design registration number 004383396-0001
2-900E
Plain Tip Forceps
● Plain tips without tying platforms
● Straight shaft
● Flat handle, length 90mm
● Design registration number 004383396-0001
2-529E
Kelman-McPherson Tying Forceps
● 6mm tying platforms
● 45° angled shafts, tip to angle length 10mm
● Flat handle, length 113mm
● Design registration number 004383396-0001
Browse our latest reusable titanium instruments
Why Surgeons Choose Duckworth & Kent
Why Surgeons Choose D&K
High Quality Reusable Instruments
Manufactured in Titanium
Precision Manufactured in England
Worldwide Delivery
Duckworth & Kent
Ophthalmic Medical Device Manufacturer
Duckworth & Kent is now the leading manufacturer of high quality titanium ophthalmic surgical instruments, marketing and distributing its own range on a world-wide basis.
Duckworth & Kent Board of Directors
Chairman
Terry Waldock
Managing Director
Jo Barker
Director of Marketing Strategy
Andrew Waldock
B.Med.Sci.(Hons), B.M. B.S., M.D., F.R.C.Ophth
Director of Business Development
Adrian Waldock
CEng MIMechE
Talk to our team on +44 (0) 1462 893254 or click here for other ways to get in touch