Capsulorhexis Forceps
Utrata Capsulorhexis Forceps
Incision down to 2.2mm
● Sharp pointed serrated tips
● Utrata style tips
● Straight shafts, tip to angle length 13mm
● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis
● Short flat handle, overall length 90mm
● E Range single piece instrument
Design registration number 004383396-0001
£175.00
Comparison Chart
Browse similar instruments, select from options in the comparison chart below.
Complementary Instruments
Products used in conjunction with the 2-719-3E Capsulorhexis Forceps
6-140
Cataract Support
Mackool Cataract Support System
● (6 to 8 recommended) ● 0.3mm x 2.8mm hook ● Overall length 8.7mm ● Supplied individually
8-711NL
I/A Handpiece
I/A Handpiece with Luer Lock, Push Fit
● Round handle, overall length 115mm ● Separates for cleaning internal parts ● Luer lock fitting on irrigation port ● Single thread at front of handpiece ● Used with 8-730, 8-731 and 8-732 series aspiration tips ● Aspiration tips purchased separately ● Silicone sleeve is pushed onto single thread ● Silicone sleeve not included
3-205
Needle Holder
Needle Holder
● 7mm delicate curved jaws ● Short round handle without lock, tag spring ● Overall length 108mm
2-500E
Tying Forceps
Tying Forceps
● 6mm tying platform
● Straight shafts
● Short flat handle, overall length 90mm
● E Range single piece instrument
Design registration number 004383396-0001
1-510
Westcott Scissors
Westcott Style Scissors, Curved
● Blunt rounded tips, curved blades ● Cut length 10mm, tip to pivot length 20mm ● Flat handle, overall length 115mm
6-250
Sinskey Hook
Sinskey Hook
● 0.18mm diameter tip, 0.35mm height ● Tip to angle length 10mm ● 45° angled shaft ● Round handle, overall length 119mm
6-496
Nucleus Rotator
Drysdale Rotator, Small
● 0.5mm x 1.3mm round ended paddle ● Tip to angle length 10mm ● 45° angled shaft ● Round handle, overall length 118mm
6-135
Sterilising Case
Mackool Holder / Sterilising Case
● External dimensions: 19mm diameter, 12mm height ● Internal dimensions: 15mm diameter, 10mm height ● Made from titanium
2-695
IOL Forceps
IOL Implant Gripping Forceps, 23 Gauge
● Fine end gripping tips ● Curved 23 gauge tube, tube length 19-20mm ● Round squeeze handle, overall length 122mm
8-652
Irrigation Handpiece
Irrigation Handpiece
● 23 gauge, 0.65mm tube diameter ● Two 0.4mm side irrigation ports ● Curved shaft, tube length 15mm ● Round handle, overall length 107mm ● Suggested Pairing: 8-657
6-085-1
Nucleus Chopper
Barrett Nucleus Chopper and Manipulator
Nucleus Chopper ● Straight, sharp inner/outer sides of tip ● Tip length 1.25mm ● Two cutting edges 60° to axis ● Tip to angle length 14mm ● 45° angled shaft Manipulator ● 0.65mm mushroom tip ● Tip to angle length 10mm ● 45° angled shaft ● Round handle, overall length 130mm
2-719-3E
Capsulorhexis Forceps
Utrata Capsulorhexis Forceps
Incision down to 2.2mm ● Sharp pointed serrated tips ● Utrata style tips ● Straight shafts, tip to angle length 13mm ● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis ● Short flat handle, overall length 90mm ● E Range single piece instrument Design registration number 004383396-0001
2-803E
Nucleus Cracker
Denman-Brown Nucleus Cracker
● 1.1mm x 1.2mm paddle style tips ● Bulge along lower edge of paddle ● 30° angled shafts, tip to angle length 14.5mm ● Flat handle, cross action tips, overall length 114mm ● E Range single piece handle Design registration number 004383396-0001
2-522E
Tying Forceps
Kelman-McPherson Tying Forceps
● 6mm tying platform
● 45° angled shafts, tip to angle length 7mm
● Short flat handle, overall length 90mm
● E Range single piece instrument
Design registration number 004383396-0001
2-796E
Nucleus Forceps
Nucleus Removal Forceps
● 4mm serrated tips ● 30° angled shafts, tip to angle length 14mm ● Flat handle, overall length 90mm ● E Range single piece instrument Design registration number 004383396-0001
1-110
Vannas Scissors
Vannas Scissors
● Sharp tips, straight blades ● Cut length 5mm, tip to pivot length 9mm ● Flat handle, overall length 97mm
2-510-1E
Utility Forceps
Moorfields Utility Forceps
● Delicate serrated tips, 1mm wide ● Straight shafts ● Flat handle, overall length 115mm ● E Range single piece instrument Design registration number 004383396-0001
Related Instruments
Similar products to the 2-719-3E Capsulorhexis Forceps
2-716G-10RE
Capsulorhexis Forceps
Jones-Inamura Capsulorhexis Forceps
Incision down to 1.8mm ● Sharp pointed serrated interlocking tips ● Cross action tips, 1.5mm width at pivot box ● Curved shaft, tip to pivot point 11mm ● Marks on shaft every 1mm from tip to 6mm denote desired size of capsulorhexis ● Tips angled 45° from shaft ● Long round handle, overall length 115mm ● E Range single piece handle Design registration number 004383396-0001
2-524E
Tying Forceps
Kelman-McPherson Tying Forceps
● 6mm tying platform
● 45° angled shafts, tip to angle length 10mm
● Short flat handle, overall length 90mm
● E Range single piece instrument
Design registration number 004383396-0001
2-719-4E
Capsulorhexis Forceps
Utrata Capsulorhexis Forceps
Incision down to 2.2mm ● Sharp pointed serrated tips ● Utrata style tips ● Straight shafts, tip to angle length 13mm ● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis ● Long flat handle, overall length 115mm ● E Range single piece instrument Design registration number 004383396-0001
2-719-3E
Capsulorhexis Forceps
Utrata Capsulorhexis Forceps
Incision down to 2.2mm ● Sharp pointed serrated tips ● Utrata style tips ● Straight shafts, tip to angle length 13mm ● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis ● Short flat handle, overall length 90mm ● E Range single piece instrument Design registration number 004383396-0001
2-716GE-1
Capsulorhexis Forceps
Inamura Capsulorhexis Forceps
Incision down to 1.8mm ● Sharp pointed serrated interlocking tips ● Cross action tips, 1.5mm width at pivot box ● Curved shaft, tip to pivot point 10.5mm ● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis ● Tips angled 45° from shaft ● Long flat handle, overall length 111mm ● E Range single piece handle Design registration number 004383396-0001
2-504ER8
Tying Forceps
Tying Forceps
● 6mm tying platform
● Straight shafts
● Long round handle, overall length 115mm
● E Range single piece instrument
Design registration number 004383396-0001
2-716G-9RE
Capsulorhexis Forceps
Calladine-Inamura Capsulorhexis Forceps
Incision down to 1.8mm ● Sharp pointed serrated interlocking tips ● Cross action tips, 1.5mm width at pivot box ● Curved shaft, tip to pivot point 10mm ● Marks on shaft 2.5mm and 5mm denote desired size of capsulorhexis ● Tips angled 45° from shaft ● Long round handle, overall length 115mm ● E Range single piece handle Design registration number 004383396-0001
2-770E
ICL Forceps
Deitz ICL Loading Forceps
● Highly polished outer jaws ● Inside jaws textured, 4mm tip angle ● 20° angled shafts, tip to angle length 14mm ● Flat handle, overall length 88mm ● E Range single piece instrument Design registration number 004383396-0001